Hi,
Apologies about this but i am new to electronics having been sucked into the mystical world of the Arduino......
I bought the Ultra-bright 3W White LED Module and when it arrived I had no idea how to wire it, does anybody know what the pin assignments are ?
Cheers
Paul
HCOPTO0010 - Ultra-bright 3W White LED Module
-
- Posts: 2
- Joined: Wed Aug 16, 2017 11:45 am
Re: HCOPTO0010 - Ultra-bright 3W White LED Module
If you take a look at the 3 pin header, pin 1 is marked 'G' and pin 3 is marked 'S'. The connections are as follows:
PIN 1: GND (0V)
PIN 2: VCC (5V)
PIN3: SWITCH (VCC = ON / GND = OFF)
PIN 1: GND (0V)
PIN 2: VCC (5V)
PIN3: SWITCH (VCC = ON / GND = OFF)
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.
-
- Posts: 2
- Joined: Wed Aug 16, 2017 11:45 am
Re: HCOPTO0010 - Ultra-bright 3W White LED Module
Andrew, cheers for your help it's much appreciated.
Cheers
Paul
Cheers
Paul