Cypress
Posted: Thu Jan 26, 2017 2:43 pm
I bought a cypress CY7C68013A to restore the start of a gigablue.
My biggest doubt is the following: the cypress is already enabled to i2c protocol?
If not how do I enable it?
I need to load through the cypress boot of 300 k.
First I have to clear the MXIC MX29GA320ELXFI-70G.
Under Windows 7 x32 I solved the problem vid / pid and drivers.
I thank all those who will help me.
My biggest doubt is the following: the cypress is already enabled to i2c protocol?
If not how do I enable it?
I need to load through the cypress boot of 300 k.
First I have to clear the MXIC MX29GA320ELXFI-70G.
Under Windows 7 x32 I solved the problem vid / pid and drivers.
I thank all those who will help me.