Cypress

Forum for posting topics and questions about anything.
Post Reply
Alexs
Posts: 1
Joined: Thu Jan 26, 2017 2:28 pm

Cypress

Post by Alexs » Thu Jan 26, 2017 2:43 pm

I bought a cypress CY7C68013A to restore the start of a gigablue.
My biggest doubt is the following: the cypress is already enabled to i2c protocol?
If not how do I enable it?
I need to load through the cypress boot of 300 k.
First I have to clear the MXIC MX29GA320ELXFI-70G.
Under Windows 7 x32 I solved the problem vid / pid and drivers.
I thank all those who will help me.
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “General Discussion”