Reply to topic  [ 3 posts ] 
Microduino Core Atmega328P (5V) (HCMIDU0001) 
Author Message
Site Admin

Joined: Sun Aug 05, 2012 4:02 pm
Posts: 670
Post Microduino Core Atmega328P (5V) (HCMIDU0001)
Image
Image
Image
Image
Example Microduino stack consisting of a Microduino Core board, RS232 and ethernet module.

Description:

Microduino-Core which is based on Atmel ATmega328P as the core of the core 8-bit microcontroller development board, is an open source architecture, compatible with Arduino UNO controller module.


Microduino-core is characterised by the following features:
Using the U-27pin Microduino interface specification, with many interface-compatible peripheral modules and sensors.

The USB serial interface has been split into a serperate module which can be stacked on top of the Microduino Core board allowing the core board to obtain its tiny footprint. Length 25.4mm X Width 27.94mm

The lightweight design gives the Microduino format advantages on size and cost when compared to a standard Arduino Uno.

Microduino is fully compatible with the Arduino development environment (requires extension - see attached file).


Model: Microduino Core Atmega328P
Flash: 16M
Opperating Voltage: 5V
FLASH: 32K
SRAM: 2K
EEPROM: 1K
Clock Frequency: 16MHz


Characteristics:

Small, cheap, stackable.

Open source hardware circuit design, compatible with the Arduino development environment programming process.

Just like and Arduino board, sketches can simply be downloaded into the Microduino using a standard ISP download cable, or by USB cable via the addion of the RS232 interface board.

Unified Microduino interface specification, allowing and rich range of peripheral modules to be 'stacked' onto the the Core board for easy expansion.



Specification:

Digital I / O digital input / output of 0 ~ 13, A0 ~ A5.
In Microduino-Core, labeled RX0, TX1, D2 ~ D13, A0 ~ A5, 20 ports for the digital input and output ports.
Analogue I / O analogue input ports of A0 ~ A7.
Microduino-Core with 8 analog inputs, respectively A0-A7, each providing a 10-bit resolution (ie 1024 different values).
Support for six channel PWM output ports, respectively, 3,5,6,9,10 and 11
ISP downloads.
MCU TX / RX terminals.
AREF pin.
IIC interface, SDA (A4), SCL (A5).
Two external interrupts, respectively, D2, D3


Microduino-Core Pinout:

Image


Microduino Core Schematic:

Attachment:
HCMIDU0001_Microduino_Core_Schematic.png


Microduino Core PCB Layout:

Image


Arduino SDK Hardware extensions:

Download the attached file and unzip it, and cop it (including the parent Microduino folder) to your Arduino\hardware folder.

Attachment:
Microduino.zip


You do not have the required permissions to view the files attached to this post.


Sat Jun 01, 2013 5:03 pm
Profile

Joined: Sat Aug 03, 2013 11:22 am
Posts: 3
Post Re: Microduino Core Atmega328P (5V) (HCMIDU0001)
presumably you can upload the sketch over the USB daughterboard, then unplug this board and just execute the code on the microduino?


Sat Aug 03, 2013 11:25 am
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 708
Post Re: Microduino Core Atmega328P (5V) (HCMIDU0001)
Yes that's right. You can use the FT232RL Serial to USB interface (HCMIDU0003) to program this board directly from the Arduino development environment. You can of course just use a standard USB to TTL serial adapter if you have one, although that method is a little more fiddly.

_________________
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.


Sat Aug 03, 2013 12:54 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Thank you to phpBB.com & phpBB.ro.
Design created by Florea Cosmin Ionut.
© 2011 All contents of this site are © Hobby Components LTD