TFT adapter board / shield for Arduino Mega (HCARDU0098)

Post Reply
admin
Site Admin
Posts: 865
Joined: Sun Aug 05, 2012 4:02 pm

TFT adapter board / shield for Arduino Mega (HCARDU0098)

Post by admin » Fri Jun 19, 2015 9:08 am

Image
Image

Image

This adapter board shield (HCARDU0098) is intended to be used with our 3.2" TFT touch screen module (HCARDU0097) which is also available for purchase via our website. This shield allows the TFT screen to be easily interfaced with an Arduino Mega. It also includes level shifters to provide correct 3.3V voltage level interface to the screen. The shield also provides support for the screens resistive touch sensor and SD card interface and is compatible with our HCTFT TFT library when used with an Arduino Mega.


Image

Schematic:
TFT_MEGA_V2.0.pdf
You do not have the required permissions to view the files attached to this post.

DIY_Monster
Posts: 13
Joined: Thu Nov 20, 2014 3:35 pm

Re: TFT adapter board / shield for Arduino Mega (HCARDU0098)

Post by DIY_Monster » Sun Jan 22, 2017 10:46 am

Can this adapter also be used with the 2.4" display HCARDU0083 - 01? The info provided on that page points to this adapter for the Mega but the info on the adapter page states that it is for the 3.5" display. Thank you.

andrew
Site Admin
Posts: 1374
Joined: Sun Aug 05, 2012 4:15 pm

Re: TFT adapter board / shield for Arduino Mega (HCARDU0098)

Post by andrew » Mon Jan 23, 2017 10:10 am

Thanks for pointing that out. I't looks like a cut and paste error from the 3.2" screen page. It's now been corrected to point to the correct adapter shield.

To answer your question the adapter shield for the Mega is hardware compatible with the 2.4" screen but our HCTFT library doesn't support this combination. So for a Mega you would either have to use the 3.2" (HCARDU0097) screen with this adapter shield, or you would have to create or modify the HCTFT library to work with this combination.

There may of course be some existing software/library that may work with this combination but I'm not aware of anything.
Comments made by this poster do not necessarily reflect the views of Hobby Components Ltd.

Post Reply

Return to “Arduino Shields”