forum.hobbycomponents.com
http://forum.hobbycomponents.com/

Prototyping adapter for ESP-07, ESP-08, ESP-12 (HCPROT0087)
http://forum.hobbycomponents.com/viewtopic.php?f=110&t=2115
Page 1 of 1

Author:  admin [ Wed Oct 05, 2016 1:31 pm ]
Post subject:  Prototyping adapter for ESP-07, ESP-08, ESP-12 (HCPROT0087)

Image



This adapter board is designed specifically for the ESP8266 ESP-07, ESP-08 and ESP-12 2.4GHz WiFi modules. It provides an easy way to break-out the individual pins on these modules to a standard 0.1" pitch set of headers, which are also supplied with the adapter. The adapter has a set of tinned pads which are perfectly positioned so that your ESP module can be soldered on to the adapter. Once soldered the adapter provides access to all the power, digital, analogue, and control pins. Additionally it also includes 2 pull-up/down resistors that pull the CH_PD/EN pin high and the GPIO15 pin low. This configures the attached module into the default operating mode.


Image



Specifications:

Item code: HCPROT0087
Compatible with: ESP-07, ESP-08 & ESP-12 modules
Width: 33mm
Height 28mm
Includes standard 0.1" pitch headers (not soldered)



Disclaimer: Libraries, example code, and diagrams are provided as an additional free service by Hobby Components and are not sold as part of this product. We do not provide any guarantees or warranties as to their accuracy or fitness for purpose.

Descriptions and diagrams on this page are copyright Hobby Components Ltd and may not be reproduced without permission.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/