Test equipments and accessories
1 post • Page 1 of 1
These test hook clips measure approximately 5x1.5cm. They use a miniature sprung claw system and are capable of grabbing very small points, such as the legs of ICs/LEDs/Resistors etc., they are available in various colours. Removing the clips cap will reveal a solder-able tab allowing the clip to be soldered on to the end of a test lead.
HCTEST0016 – Green
HCTEST0017 – Yellow
HCTEST0018 – Black
HCTEST0019 – Red
HCTEST0020 - Blue
Please note this item requires soldering.