Reply to topic  [ 71 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST0006) 
Author Message

Joined: Mon Nov 09, 2015 12:40 pm
Posts: 4
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
Hi,

I've got it working on Ubuntu now so I'm happy. I only tried it on Windows as I figured Linux would be a lost cause!

Either way, I'm very impressed with the support you've given. I bought mine from your eBay store, usually I find cheap electronics off eBay to be a lost cause but I've been very impressed. I'll definitely be buying more things from you in the future.

Steve


Wed Nov 11, 2015 10:57 am
Profile

Joined: Thu Nov 19, 2015 3:02 pm
Posts: 2
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
I received my analyser today and sadly I see most of the above problems:

In Win 7 x64 I don't know if I am loading the driver. There is a box that flashes but I cannot read it so but I cannot tell if that is good or bad.

The analyser attaches as an unknown device with VID 0925 and PID 3881. Does this mean the processor has not been flashed?

Steve


Thu Nov 19, 2015 3:29 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 620
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
Some versions of windows (64 bit) actively block unsigned drivers. This is likely to be your issue. There are several things to try in the following order:

1) Restart your computer and as it reboots press F8 to get into the windows boot options menu. Then from the boot menu select 'Disable driver signature enforcement'. When your computer reboots try the installer exe file again.

2) In the driver folder locate the fx2lafw.inf file and right click it. From the context menu select install.

3) Open up device manager and locate the analyser (will probably be listed as unknown device), right click it and select 'Update driver software'. In the window that opens up click the 'browse my computer for driver software' button and navigate to wherever you saved the driver folder then click ok.

4) Install the Sigrock PulseView software. Then navigate to C:\Program Files\sigrok\PulseView\

In that folder you will find a file called zadig.exe

Double click to run it. In the window that opens up you should see the logic analyser listed. If not go to options->list all devices. In the selection box below make sure you have WinUSB (vx.x.xxxx.xxxxx) listed, then click the install WINICD driver button.


Hopefully one of the above will resolve your problem.


Thu Nov 19, 2015 4:17 pm
Profile

Joined: Thu Nov 19, 2015 3:02 pm
Posts: 2
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
I read the article about changing the VID and PID then realised that VID and PID are for another analyser. I downloaded the package for that device and now I can use that driver.

Works well with Pulsview

Steve


Thu Nov 19, 2015 4:26 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 620
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
Ok no problem. We ship them with the default VID of 04B4 and PID of 8613. They are also currently shipped with no firmware as PulseView pushes the current firmware into it anyway. I'm not sure why yours would be different.

If anybody reading this thread is still having issues installing the driver after trying the above steps could they contact support (at) hobby components.com with their order number and we will attempt to resolve the problem.


Thu Nov 19, 2015 4:45 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 620
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
@AshHalfheart

There is a new version of PulseView available. I've just tested it on a clean install of Windows 8 and I can confirm that it is working fine. If your still seeing this issue try installing the latest version.


Fri Dec 11, 2015 4:13 pm
Profile

Joined: Thu Jun 30, 2016 6:45 pm
Posts: 1
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
I just received my logic analyzer in the post. Unfortunately I did not realize the software is Windows only. Has anyone been successful getting it running under Mac OS X?

~ Russ


Thu Jun 30, 2016 6:48 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 620
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
There are some homebrew versions. Have you looked at the following page?

http://sigrok.org/wiki/Mac_OS_X#Building_using_Homebrew


Fri Jul 01, 2016 3:52 pm
Profile

Joined: Tue Jul 12, 2016 7:54 am
Posts: 2
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
Hi,

I downloaded the USB driver files, but doesn't extract that.
I try two computer, but doesn't work.

Thank you

Tony


Tue Jul 12, 2016 2:17 pm
Profile
Site Admin

Joined: Sun Aug 05, 2012 4:15 pm
Posts: 620
Post Re: Hobby Components USB 8CH 24MHz Logic Analyser (HCTEST000
Quote:
I downloaded the USB driver files, but doesn't extract that.


I've just check it and everything seems to unzip ok. Are you downloading it from the link in the first post of this thread? Here is the correct link again:

http://hobbycomponents.com/downloads/HC ... Driver.zip


Tue Jul 12, 2016 3:07 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 71 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Thank you to phpBB.com & phpBB.ro.
Design created by Florea Cosmin Ionut.
© 2011 All contents of this site are © Hobby Components LTD