Conductive Thread – 6m Bobbin (HCPROJ0008)

Soldering accessories, project boxes, keypads, battery holders etc.
Post Reply
admin
Site Admin
Posts: 866
Joined: Sun Aug 05, 2012 4:02 pm

Conductive Thread – 6m Bobbin (HCPROJ0008)

Post by admin » Mon Jul 11, 2016 3:11 pm

Image




This highly conductive thread is ideal for introducing electronics into textile projects. The thread looks and behaves like conventional sewing thread with the added bonus of being highly conductive. The thread comes on a standard bobbin containing 6 metres.

Thread has a resistance of approximately 0.4Ω/cm, or 12Ω/foot.

Resistance does not vary significantly from one length of thread to the next as some are reported to do, so you should be able to use this thread without concern for "dead" sections.

The thread has a breaking strain of around 4.2kg (9.3 pounds).

It comprises roughly 96 individual filaments, each coated with a micron-thick layer of natural silver. 16 of these filaments are wound together to form an initial twist; two of these twists are then twisted together, and finally three of these twists are combined.

In thread terms, thickness is approximately 18 denier.

This thread does not fray: there are no loose ends of filaments except where they have been cut.

Post Reply

Return to “Project / Soldering”