forum.hobbycomponents.com

Would this allow a suitable heating (menu P0 Heat C/H ) circuit to terminate the charge? I don't see any reason why it couldn't be used in that way. So long as you can ensure that the battery does stay within its temperature specification when charging, the modules heating mode should work. I would...

I'm afraid we don't stock that part.

Thanks for the feedback.

. I removed the bezel and noticed that there is no connections between the the display and the breakout board pc. Back of the display itself there is just a rubber pad where the contacts should be. Yes, that rubber strip is actually the thing that connects the LCD substrate to the PCB. If you look ...

The link to the library is at the very bottom of the first post of this thread (under the heading 'Downloads'):

viewtopic.php?p=4956#p4956

Note you will need to be logged in to download it.

New to the store and putting together the pieces for the first of a few planned projects based on LoRa for communication. I wondered if you had given any thought to stocking at least one low cost LoRa module? Yes, this is something we defiantly want to stock in the near future but at the moment I c...

OK I now have prolific driver version 3.3.11.152 dated 12/3/2010 installed.
Is that correct?

Yes that is the correct one.

According to my device manager, I'm using a prolific driver dated November 2023 version 3.9.6.2 That’s the wrong driver and was probably installed automatically by Windows. You’ll need to first remove it by following these steps: 1) Find the entry for the K150 in device manager which will be listed...

Hi, I'm struggling with the port issue. I'm running Windows 11 Home on an Asus VivoBook. The Programmer is correctly set to K150..... Have you installed the ‘unofficial driver’ found in the first post of this thread or are you using the one automatically installed by Windows? If it’s the latter, th...

Glad you got it working. LiquidCrystal_I2C lcd(0x3F,16,2); and not LiquidCrystal_I2C lcd(0x27,16,2); Just so you know – the opposite is required. Yep, they can either be 0x27 or 0x3F depending on the version you have. Both options are in the sketch. I should have pointed out to try both. I'm going t...