Hi All,
Sorry for the question above, have solved the issue doing things a different way.
Please dissregard the question.
Thanks
Search found 73 matches
- Sun Feb 25, 2024 9:19 pm
- Forum: General Discussion
- Topic: PIN CHANGE Interrupts
- Replies: 1
- Views: 371
- Fri Feb 23, 2024 3:21 pm
- Forum: General Discussion
- Topic: PIN CHANGE Interrupts
- Replies: 1
- Views: 371
PIN CHANGE Interrupts
Hi All, I'm gradually getting into PIN CHANGE Interrupts, so far so good. However I've come across a small issue which I cannot seem to find any info about ... Question: How do I check for a Pin Change on the RESET Pin ? I can find it in the PCIE1/PMSK1(Bit 6)/PCINT14 Tables, but get errors whenever...
- Fri May 05, 2023 9:01 pm
- Forum: RTC
- Topic: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)
- Replies: 19
- Views: 50013
Re: High Accuracy DS3231 RTC & EEPROM (HCMODU0094)
Hi Andrew, Thought I'd use the Forum for this, maybe stupid, question. I use DS3231 & DS1307 RTCs a lot for the Projects I do. But I have now reached the point of requiring the 'Time' data down to 1/100 second or better. Q1: Are/is there a way of getting second times at this level from either of the...
- Sat Oct 15, 2022 3:35 pm
- Forum: Arduino
- Topic: HCMatrixkeypad - Matrix keypad library
- Replies: 22
- Views: 28429
Re: HCMatrixkeypad - Matrix keypad library
Hi Andrew, Thanks for the efforts yo are making, very much appreciated. For what it's worth, please don't keep 'faffing around' with it --- it's not worth it. All I need to do is remember to just hit 'my' version of Ret Key( # ) then do a reload from EEPROM and everything is back to where it should ...
- Fri Oct 14, 2022 1:41 pm
- Forum: Arduino
- Topic: HCMatrixkeypad - Matrix keypad library
- Replies: 22
- Views: 28429
Re: HCMatrixkeypad - Matrix keypad library
Hi Andrew, Sorry to be a nuisance, but I have just run a couple of silly Tests. As you know I run Win XP-Pro sp3. T1: Compile using IDE v1.0.6 - RET CODE error does NOT occur; repeat does NOT occur. T2: Compile using IDE v 1.8.9 - RET CODE error DOES occur; repeat DOES occur. To me that points to so...
- Fri Oct 14, 2022 1:28 pm
- Forum: Arduino
- Topic: HCMatrixkeypad - Matrix keypad library
- Replies: 22
- Views: 28429
Re: HCMatrixkeypad - Matrix keypad library
Hi Andrew,
Sorry to say it does the same, 1st RET CODE is always 'Pick a Number', after that Perfect.
All I can say is Very Strange.
However, could it also be a pointer to Win XP OS ?
Regards S.
Sorry to say it does the same, 1st RET CODE is always 'Pick a Number', after that Perfect.
All I can say is Very Strange.
However, could it also be a pointer to Win XP OS ?
Regards S.
- Thu Oct 13, 2022 7:07 pm
- Forum: Arduino
- Topic: HCMatrixkeypad - Matrix keypad library
- Replies: 22
- Views: 28429
Re: HCMatrixkeypad - Matrix keypad library
Hi Andrew / All, General question as I am experiencing a little issue with the 4x4 Keypad. All the keys work fine, all RET Values are fine - Except for the VERY FIRST returned Value. The only way I can describe it is for you to PICK any number between 0 & 255 - that is what I get. After that, I get ...
- Mon Oct 10, 2022 12:19 pm
- Forum: Sensors
- Topic: HX711 Bridge Sensor Digital Interface Module (HCMODU0073)
- Replies: 8
- Views: 35732
Re: HX711 Bridge Sensor Digital Interface Module (HCMODU0073)
Hi Andrew,
Makes sense, didn't want to power the Bridge only to get no reading.
Regards S.
Makes sense, didn't want to power the Bridge only to get no reading.
Regards S.
- Sun Oct 09, 2022 10:30 am
- Forum: Sensors
- Topic: HX711 Bridge Sensor Digital Interface Module (HCMODU0073)
- Replies: 8
- Views: 35732
Re: HX711 Bridge Sensor Digital Interface Module (HCMODU0073)
Hi, Is the E+ & E- ( AVDD & GND ) pre-connected to the 711 ic ? I have measured an Output of 3.8v on E+ with 5.20v applied to VCC, or will E+ vary dependant on A+/- Inputs. I don't really want to connect the Wheatstone Bridge to AVDD if the voltage will vary - this is for a Pt100. Simply trying to s...
- Sun Sep 25, 2022 9:08 am
- Forum: Display
- Topic: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
- Replies: 38
- Views: 125006
Re: 12864B Parallel/Serial Graphic LCD Module (HCMODU0032)
Hi Andrew and thanks for the reply. Yes, the answer was concise enough. I understood before about the Character/Graphics - either/or - modes, think I will need to re-evaluate how I can do what I need as I require both of the Modes on the same screen. Anyway, the actual screen is good, displaying wha...